Struct PitchShifterModuleHandle

Namespace

SunSharp.Modules

Assembly

SunSharp.dll

Pitch shifter is a module for changing the pitch of any sound in real time. The signal at the output of the module is always slightly delayed.

public readonly struct PitchShifterModuleHandle : IPitchShifterModuleHandle, ITypedModuleHandle, IGenericSynthModuleHandle

Implements

IPitchShifterModuleHandle

ITypedModuleHandle

IGenericSynthModuleHandle

Constructors

PitchShifterModuleHandle(SynthModuleHandle)

public PitchShifterModuleHandle(SynthModuleHandle moduleHandle)

Parameters

moduleHandle SynthModuleHandle

Properties

Id

Gets the ID of the synthesizer module.

public int Id { get; }

Property Value

int

ModuleHandle

public SynthModuleHandle ModuleHandle { get; }

Property Value

SynthModuleHandle

Slot

Gets the slot associated with this instance.

public ISlot Slot { get; }

Property Value

ISlot

Methods

AssertCorrectHandleType()

Throws an exception if the underlying module is not of the correct type.

public void AssertCorrectHandleType()

Exceptions

IncorrectSynthHandleTypeException

Thrown if the underlying module is not of the correct type.

ConnectInput(SynthModuleHandle)

Connect the input of this module to the output of another module.

public void ConnectInput(SynthModuleHandle targetModule)

Parameters

targetModule SynthModuleHandle

Remarks

Requires LockSlot(int) / UnlockSlot(int).

Calls sv_connect_module(int, int, int).

Exceptions

SunVoxException

Thrown when the operation fails.

ConnectOutput(SynthModuleHandle)

Connect the output of this module to the input of another module.

public void ConnectOutput(SynthModuleHandle targetModule)

Parameters

targetModule SynthModuleHandle

Remarks

Requires LockSlot(int) / UnlockSlot(int).

Calls sv_connect_module(int, int, int).

Exceptions

SunVoxException

Thrown when the operation fails.

DisconnectInput(SynthModuleHandle)

Disconnect the input of this module from the output of another module.

public void DisconnectInput(SynthModuleHandle targetModule)

Parameters

targetModule SynthModuleHandle

Remarks

Requires LockSlot(int) / UnlockSlot(int).

Calls sv_connect_module(int, int, int).

Exceptions

SunVoxException

Thrown when the operation fails.

DisconnectOutput(SynthModuleHandle)

Disconnect the output of this module from the input of another module.

public void DisconnectOutput(SynthModuleHandle targetModule)

Parameters

targetModule SynthModuleHandle

Remarks

Requires LockSlot(int) / UnlockSlot(int).

Calls sv_connect_module(int, int, int).

Exceptions

SunVoxException

Thrown when the operation fails.

GetBypassIfPitch0()

Original name: 6 'Bypass if pitch=0'

public PitchShifterBypassMode GetBypassIfPitch0()

Returns

PitchShifterBypassMode

GetColor()

Get the module color.

public (byte, byte, byte) GetColor()

Returns

(byte R, byte G, byte B)

RGB color tuple (r, g, b).

Remarks

Calls sv_get_module_color(int, int).

GetExists()

Check if a module exists.

public bool GetExists()

Returns

bool

true if module exists.

Remarks

Calls sv_get_module_flags(int, int).

GetFeedback(ValueScalingMode)

Value range: displayed: 0 to 256, real: 0 to 256 Original name: 3 'Feedback'

public int GetFeedback(ValueScalingMode valueScalingMode = ValueScalingMode.Displayed)

Parameters

valueScalingMode ValueScalingMode

Returns

int

GetFineTune()

Get the module fine tune and relative note values.

public FineTunePair GetFineTune()

Returns

FineTunePair

Fine tune pair containing fine tune value and relative note.

Remarks

Calls sv_get_module_finetune(int, int).

GetFlags()

Get the module flags.

public ModuleFlags GetFlags()

Returns

ModuleFlags

Module flags indicating existence, type, state, and connections.

Remarks

Calls sv_get_module_flags(int, int).

GetGrainSize(ValueScalingMode)

Value range: displayed: 0 to 256, real: 0 to 256 Original name: 4 'Grain size'

public int GetGrainSize(ValueScalingMode valueScalingMode = ValueScalingMode.Displayed)

Parameters

valueScalingMode ValueScalingMode

Returns

int

GetInputModules()

Get the array of input modules connected to this module.

public SynthModuleHandle[] GetInputModules()

Returns

SynthModuleHandle[]

Array of connected input module numbers.

Remarks

Calls sv_get_module_inputs(int, int).

GetInputs()

Get the array of input module numbers connected to this module.

public int[] GetInputs()

Returns

int[]

Array of connected input module numbers.

Remarks

Calls sv_get_module_inputs(int, int).

GetMode()

Original name: 5 'Mode'

public Quality GetMode()

Returns

Quality

GetModuleType()

Returns the module type. If the module does not exist, returns null. If the module type is unknown (due to library mismatch or otherwise), returns Unknown.

public SynthModuleType? GetModuleType()

Returns

SynthModuleType?

GetName()

Get the module name.

public string? GetName()

Returns

string

Module name, or null if unavailable.

Remarks

Calls sv_get_module_name(int, int).

GetOutputModules()

Gets the array of output modules connected to this module.

public SynthModuleHandle[] GetOutputModules()

Returns

SynthModuleHandle[]

Array of connected output module numbers.

Remarks

Calls sv_get_module_outputs(int, int).

GetOutputs()

Get the array of output module numbers connected from this module.

public int[] GetOutputs()

Returns

int[]

Array of connected output module numbers.

Remarks

Calls sv_get_module_outputs(int, int).

GetPitch(ValueScalingMode)

Value range: displayed: -600 to 600, real: 0 to 1200 Original name: 1 'Pitch'

public int GetPitch(ValueScalingMode valueScalingMode = ValueScalingMode.Displayed)

Parameters

valueScalingMode ValueScalingMode

Returns

int

GetPitchScale(ValueScalingMode)

Value range: displayed: 0 to 200, real: 0 to 200 Original name: 2 'Pitch scale'

public int GetPitchScale(ValueScalingMode valueScalingMode = ValueScalingMode.Displayed)

Parameters

valueScalingMode ValueScalingMode

Returns

int

GetPosition()

Get the module position on the canvas.

public (int, int) GetPosition()

Returns

(int x, int y)

Tuple containing X and Y coordinates.

Remarks

Calls sv_get_module_xy(int, int).

GetVolume(ValueScalingMode)

Value range: displayed: 0 to 512, real: 0 to 512 Original name: 0 'Volume'

public int GetVolume(ValueScalingMode valueScalingMode = ValueScalingMode.Displayed)

Parameters

valueScalingMode ValueScalingMode

Returns

int

IsCorrectHandleType()

Determines whether the underlying module is of the correct type.

public bool IsCorrectHandleType()

Returns

bool

MakeBypassIfPitch0Event(PitchShifterBypassMode)

This is a helper method to automatically handle turning target controller values into column values.

For this controller the input value is taken as is, only clamped to column value range.

public PatternEvent MakeBypassIfPitch0Event(PitchShifterBypassMode value)

Parameters

value PitchShifterBypassMode

Returns

PatternEvent

MakeEvent(Note, byte?, byte?, Effect, ushort)

Creates a new generic pattern event with optional parameters for flexible event construction.

public PatternEvent MakeEvent(Note note = default, byte? velocity = null, byte? controller = null, Effect effect = Effect.None, ushort value = 0)

Parameters

note Note

Note value. Allows for explicit note commands.

velocity byte?

Note velocity. Returns null when default velocity is used. Automatically handles the +1 offset used in raw data.

controller byte?

Controller identifier (0-based). Returns null when no controller is specified. Module controllers: 0-126 (raw data: 1-127). MIDI controllers: 127+ (raw data: 0x80+). Automatically handles the +1 offset used in raw data.

effect Effect

Pattern event effect code.

value ushort

Parameter value for controller or effect (16-bit unsigned integer).

Range: 0-32768 (0x8000) for controllers, 0-65535 (0xFFFF) for effects.

For pitch commands: 0x0000 = highest pitch, 0x7800 = C0, 0x100 = one semitone.

Returns

PatternEvent

A new PatternEvent with the specified fields.

Remarks

This method provides maximum flexibility for creating events. For common scenarios, consider using specific factory methods like NoteEvent(Note, int?, byte?), ControllerEvent(int, byte, ushort), etc.

MakeFeedbackEvent(int)

This is a helper method to automatically handle turning target controller values into column values.

For this controller the input value is mapped from displayed range (0 to 256) to column range (0 to 0x8000). Out of range values are clamped.

public PatternEvent MakeFeedbackEvent(int value)

Parameters

value int

Returns

PatternEvent

MakeGrainSizeEvent(int)

This is a helper method to automatically handle turning target controller values into column values.

For this controller the input value is mapped from displayed range (0 to 256) to column range (0 to 0x8000). Out of range values are clamped.

public PatternEvent MakeGrainSizeEvent(int value)

Parameters

value int

Returns

PatternEvent

MakeModeEvent(Quality)

This is a helper method to automatically handle turning target controller values into column values.

For this controller the input value is taken as is, only clamped to column value range.

public PatternEvent MakeModeEvent(Quality value)

Parameters

value Quality

Returns

PatternEvent

MakeNoteEvent(Note, byte?)

Creates a note event that triggers a note on the specified module.

public PatternEvent MakeNoteEvent(Note note, byte? velocity = null)

Parameters

note Note

Note value. Allows for explicit note commands.

velocity byte?

Note velocity. Returns null when default velocity is used. Automatically handles the +1 offset used in raw data.

Returns

PatternEvent

MakePitchEvent(int)

This is a helper method to automatically handle turning target controller values into column values.

For this controller the input value is mapped from displayed range (-600 to 600) to column range (0 to 0x8000). Out of range values are clamped.

public PatternEvent MakePitchEvent(int value)

Parameters

value int

Returns

PatternEvent

MakePitchScaleEvent(int)

This is a helper method to automatically handle turning target controller values into column values.

For this controller the input value is mapped from displayed range (0 to 200) to column range (0 to 0x8000). Out of range values are clamped.

public PatternEvent MakePitchScaleEvent(int value)

Parameters

value int

Returns

PatternEvent

MakeSetControllerValueEvent(byte, ushort)

Creates a controller event that changes a module parameter.

public PatternEvent MakeSetControllerValueEvent(byte controllerId, ushort value)

Parameters

controllerId byte

value ushort

Parameter value for controller or effect (16-bit unsigned integer).

Range: 0-32768 (0x8000) for controllers, 0-65535 (0xFFFF) for effects.

For pitch commands: 0x0000 = highest pitch, 0x7800 = C0, 0x100 = one semitone.

Returns

PatternEvent

Remarks

For better type safety and readability, consider using typed module handles and extension methods.

MakeSetFrequencyEvent(double, byte?)

Creates a Set Pitch event by converting a frequency in Hz to the appropriate pitch value.

public PatternEvent MakeSetFrequencyEvent(double frequency, byte? velocity = null)

Parameters

frequency double

Frequency in Hz (e.g., 440.0 for A4).

velocity byte?

Velocity value (0-128). Use null for default velocity.

Returns

PatternEvent

A new PatternEvent with the calculated pitch value.

Examples

// Set pitch to A4 (440 Hz)
var a440 = PatternEvent.SetFrequencyEvent(0, 440.0, 100);
// Set pitch to middle C (261.63 Hz)
var c4 = PatternEvent.SetFrequencyEvent(0, 261.63);

MakeSetPitchEvent(ushort, byte?)

Creates a Set Pitch event with exact pitch value for microtonal or pitch-bend effects.

public PatternEvent MakeSetPitchEvent(ushort pitch, byte? velocity = null)

Parameters

pitch ushort

Pitch value where 0x0000 = highest pitch, 0x7800 = C0 (lowest), 0x100 = one semitone.

velocity byte?

Velocity value (0-128). Use null for default velocity.

Returns

PatternEvent

A new PatternEvent configured as a set pitch event.

Examples

// Set pitch to middle C (C4 = 0x3C00)
var middleC = PatternEvent.SetPitchEvent(0, 0x3C00);
// Set pitch to A4 (440Hz reference = 0x4500)
var a440 = PatternEvent.SetPitchEvent(0, 0x4500, 100);

MakeVolumeEvent(int)

This is a helper method to automatically handle turning target controller values into column values.

For this controller the input value is mapped from displayed range (0 to 512) to column range (0 to 0x8000). Out of range values are clamped.

public PatternEvent MakeVolumeEvent(int value)

Parameters

value int

Returns

PatternEvent

ReadScope(AudioChannel, short[])

Read module scope view, and write it to a buffer.

public int ReadScope(AudioChannel channel, short[] buffer)

Parameters

channel AudioChannel

Audio channel.

buffer short[]

Buffer to receive scope data.

Returns

int

Number of samples successfully read.

Remarks

Calls sv_get_module_scope2(int, int, int, IntPtr, uint).

Exceptions

ArgumentNullException

Thrown if buffer is null.

SetBypassIfPitch0(PitchShifterBypassMode)

Original name: 6 'Bypass if pitch=0' Note: equivalent SendEvent(int, PatternEvent) will be used internally, which may introduce latency. It will also be affected by the event timestamp set.

public void SetBypassIfPitch0(PitchShifterBypassMode value)

Parameters

value PitchShifterBypassMode

SetColor(byte, byte, byte)

Set the module color.

public void SetColor(byte r, byte g, byte b)

Parameters

r byte

Red component (0 to 255).

g byte

Green component (0 to 255).

b byte

Blue component (0 to 255).

Remarks

Calls sv_set_module_color(int, int, int).

Exceptions

SunVoxException

Thrown when the operation fails.

SetFeedback(int, ValueScalingMode)

Value range: displayed: 0 to 256, real: 0 to 256 Original name: 3 'Feedback' Note: equivalent SendEvent(int, PatternEvent) will be used internally, which may introduce latency. It will also be affected by the event timestamp set.

public void SetFeedback(int value, ValueScalingMode valueScalingMode = ValueScalingMode.Displayed)

Parameters

value int

valueScalingMode ValueScalingMode

SetFineTune(FineTunePair)

Sets the fine tune for the module.

public void SetFineTune(FineTunePair fineTune)

Parameters

fineTune FineTunePair

SetGrainSize(int, ValueScalingMode)

Value range: displayed: 0 to 256, real: 0 to 256 Original name: 4 'Grain size' Note: equivalent SendEvent(int, PatternEvent) will be used internally, which may introduce latency. It will also be affected by the event timestamp set.

public void SetGrainSize(int value, ValueScalingMode valueScalingMode = ValueScalingMode.Displayed)

Parameters

value int

valueScalingMode ValueScalingMode

SetMode(Quality)

Original name: 5 'Mode' Note: equivalent SendEvent(int, PatternEvent) will be used internally, which may introduce latency. It will also be affected by the event timestamp set.

public void SetMode(Quality value)

Parameters

value Quality

SetName(string)

Set the module name.

public void SetName(string name)

Parameters

name string

New module name.

Remarks

Calls sv_set_module_name(int, int, IntPtr).

Exceptions

SunVoxException

Thrown when the operation fails.

ArgumentNullException

Thrown if name is null.

SetPitch(int, ValueScalingMode)

Value range: displayed: -600 to 600, real: 0 to 1200 Original name: 1 'Pitch' Note: equivalent SendEvent(int, PatternEvent) will be used internally, which may introduce latency. It will also be affected by the event timestamp set.

public void SetPitch(int value, ValueScalingMode valueScalingMode = ValueScalingMode.Displayed)

Parameters

value int

valueScalingMode ValueScalingMode

SetPitchScale(int, ValueScalingMode)

Value range: displayed: 0 to 200, real: 0 to 200 Original name: 2 'Pitch scale' Note: equivalent SendEvent(int, PatternEvent) will be used internally, which may introduce latency. It will also be affected by the event timestamp set.

public void SetPitchScale(int value, ValueScalingMode valueScalingMode = ValueScalingMode.Displayed)

Parameters

value int

valueScalingMode ValueScalingMode

SetPosition(int, int)

Set the module position.

public void SetPosition(int x, int y)

Parameters

x int

X coordinate (center: 512, working area: 0 to 1024).

y int

Y coordinate (center: 512, working area: 0 to 1024).

Remarks

Calls sv_set_module_xy(int, int, int, int).

Exceptions

SunVoxException

Thrown when the operation fails.

SetVolume(int, ValueScalingMode)

Value range: displayed: 0 to 512, real: 0 to 512 Original name: 0 'Volume' Note: equivalent SendEvent(int, PatternEvent) will be used internally, which may introduce latency. It will also be affected by the event timestamp set.

public void SetVolume(int value, ValueScalingMode valueScalingMode = ValueScalingMode.Displayed)

Parameters

value int

valueScalingMode ValueScalingMode

Operators

implicit operator SynthModuleHandle(PitchShifterModuleHandle)

public static implicit operator SynthModuleHandle(PitchShifterModuleHandle handle)

Parameters

handle PitchShifterModuleHandle

Returns

SynthModuleHandle