Struct GlideModuleHandle

Namespace

SunSharp.Modules

Assembly

SunSharp.dll

Glide is similar to the MultiSynth (which sends the input events to the connected output modules), but it also adds the commands of smooth transition between the notes.

public readonly struct GlideModuleHandle : IGlideModuleHandle, ITypedModuleHandle, IGenericSynthModuleHandle

Implements

IGlideModuleHandle

ITypedModuleHandle

IGenericSynthModuleHandle

Constructors

GlideModuleHandle(SynthModuleHandle)

public GlideModuleHandle(SynthModuleHandle moduleHandle)

Parameters

moduleHandle SynthModuleHandle

Properties

Id

Gets the ID of the synthesizer module.

public int Id { get; }

Property Value

int

ModuleHandle

public SynthModuleHandle ModuleHandle { get; }

Property Value

SynthModuleHandle

Slot

Gets the slot associated with this instance.

public ISlot Slot { get; }

Property Value

ISlot

Methods

AssertCorrectHandleType()

Throws an exception if the underlying module is not of the correct type.

public void AssertCorrectHandleType()

Exceptions

IncorrectSynthHandleTypeException

Thrown if the underlying module is not of the correct type.

ConnectInput(SynthModuleHandle)

Connect the input of this module to the output of another module.

public void ConnectInput(SynthModuleHandle targetModule)

Parameters

targetModule SynthModuleHandle

Remarks

Requires LockSlot(int) / UnlockSlot(int).

Calls sv_connect_module(int, int, int).

Exceptions

SunVoxException

Thrown when the operation fails.

ConnectOutput(SynthModuleHandle)

Connect the output of this module to the input of another module.

public void ConnectOutput(SynthModuleHandle targetModule)

Parameters

targetModule SynthModuleHandle

Remarks

Requires LockSlot(int) / UnlockSlot(int).

Calls sv_connect_module(int, int, int).

Exceptions

SunVoxException

Thrown when the operation fails.

DisconnectInput(SynthModuleHandle)

Disconnect the input of this module from the output of another module.

public void DisconnectInput(SynthModuleHandle targetModule)

Parameters

targetModule SynthModuleHandle

Remarks

Requires LockSlot(int) / UnlockSlot(int).

Calls sv_connect_module(int, int, int).

Exceptions

SunVoxException

Thrown when the operation fails.

DisconnectOutput(SynthModuleHandle)

Disconnect the output of this module from the input of another module.

public void DisconnectOutput(SynthModuleHandle targetModule)

Parameters

targetModule SynthModuleHandle

Remarks

Requires LockSlot(int) / UnlockSlot(int).

Calls sv_connect_module(int, int, int).

Exceptions

SunVoxException

Thrown when the operation fails.

GetColor()

Get the module color.

public (byte, byte, byte) GetColor()

Returns

(byte R, byte G, byte B)

RGB color tuple (r, g, b).

Remarks

Calls sv_get_module_color(int, int).

GetExists()

Check if a module exists.

public bool GetExists()

Returns

bool

true if module exists.

Remarks

Calls sv_get_module_flags(int, int).

GetFineTune()

Get the module fine tune and relative note values.

public FineTunePair GetFineTune()

Returns

FineTunePair

Fine tune pair containing fine tune value and relative note.

Remarks

Calls sv_get_module_finetune(int, int).

GetFlags()

Get the module flags.

public ModuleFlags GetFlags()

Returns

ModuleFlags

Module flags indicating existence, type, state, and connections.

Remarks

Calls sv_get_module_flags(int, int).

GetFreqDivide(ValueScalingMode)

Original name: 9 'Freq divide'

public int GetFreqDivide(ValueScalingMode valueScalingMode = ValueScalingMode.Displayed)

Parameters

valueScalingMode ValueScalingMode

Returns

int

GetFreqMultiply(ValueScalingMode)

Original name: 8 'Freq multiply'

public int GetFreqMultiply(ValueScalingMode valueScalingMode = ValueScalingMode.Displayed)

Parameters

valueScalingMode ValueScalingMode

Returns

int

GetInputModules()

Get the array of input modules connected to this module.

public SynthModuleHandle[] GetInputModules()

Returns

SynthModuleHandle[]

Array of connected input module numbers.

Remarks

Calls sv_get_module_inputs(int, int).

GetInputs()

Get the array of input module numbers connected to this module.

public int[] GetInputs()

Returns

int[]

Array of connected input module numbers.

Remarks

Calls sv_get_module_inputs(int, int).

GetModuleType()

Returns the module type. If the module does not exist, returns null. If the module type is unknown (due to library mismatch or otherwise), returns Unknown.

public SynthModuleType? GetModuleType()

Returns

SynthModuleType?

GetName()

Get the module name.

public string? GetName()

Returns

string

Module name, or null if unavailable.

Remarks

Calls sv_get_module_name(int, int).

GetOctave(ValueScalingMode)

Original name: 7 'Octave'

public int GetOctave(ValueScalingMode valueScalingMode = ValueScalingMode.Displayed)

Parameters

valueScalingMode ValueScalingMode

Returns

int

GetOutputModules()

Gets the array of output modules connected to this module.

public SynthModuleHandle[] GetOutputModules()

Returns

SynthModuleHandle[]

Array of connected output module numbers.

Remarks

Calls sv_get_module_outputs(int, int).

GetOutputs()

Get the array of output module numbers connected from this module.

public int[] GetOutputs()

Returns

int[]

Array of connected output module numbers.

Remarks

Calls sv_get_module_outputs(int, int).

GetPitch(ValueScalingMode)

Value range: displayed: -600 to 600, real: 0 to 1200 Original name: 4 'Pitch'

public int GetPitch(ValueScalingMode valueScalingMode = ValueScalingMode.Displayed)

Parameters

valueScalingMode ValueScalingMode

Returns

int

GetPitchScale(ValueScalingMode)

Value range: displayed: 0 to 200, real: 0 to 200 Original name: 5 'Pitch scale'

public int GetPitchScale(ValueScalingMode valueScalingMode = ValueScalingMode.Displayed)

Parameters

valueScalingMode ValueScalingMode

Returns

int

GetPolyphony()

Original name: 3 'Polyphony'

public Toggle GetPolyphony()

Returns

Toggle

GetPosition()

Get the module position on the canvas.

public (int, int) GetPosition()

Returns

(int x, int y)

Tuple containing X and Y coordinates.

Remarks

Calls sv_get_module_xy(int, int).

GetReset()

Original name: 6 'Reset'

public Toggle GetReset()

Returns

Toggle

GetResetOnStNote1()

Original name: 2 'Reset on 1st note'

public Toggle GetResetOnStNote1()

Returns

Toggle

GetResponse(ValueScalingMode)

Value range: displayed: 0 to 1000, real: 0 to 1000 Original name: 0 'Response'

public int GetResponse(ValueScalingMode valueScalingMode = ValueScalingMode.Displayed)

Parameters

valueScalingMode ValueScalingMode

Returns

int

GetSampleRate(ValueScalingMode)

Value range: displayed: 1 to 32768, real: 1 to 32768 Original name: 1 'Sample rate'

public int GetSampleRate(ValueScalingMode valueScalingMode = ValueScalingMode.Displayed)

Parameters

valueScalingMode ValueScalingMode

Returns

int

IsCorrectHandleType()

Determines whether the underlying module is of the correct type.

public bool IsCorrectHandleType()

Returns

bool

MakeEvent(Note, byte?, byte?, Effect, ushort)

Creates a new generic pattern event with optional parameters for flexible event construction.

public PatternEvent MakeEvent(Note note = default, byte? velocity = null, byte? controller = null, Effect effect = Effect.None, ushort value = 0)

Parameters

note Note

Note value. Allows for explicit note commands.

velocity byte?

Note velocity. Returns null when default velocity is used. Automatically handles the +1 offset used in raw data.

controller byte?

Controller identifier (0-based). Returns null when no controller is specified. Module controllers: 0-126 (raw data: 1-127). MIDI controllers: 127+ (raw data: 0x80+). Automatically handles the +1 offset used in raw data.

effect Effect

Pattern event effect code.

value ushort

Parameter value for controller or effect (16-bit unsigned integer).

Range: 0-32768 (0x8000) for controllers, 0-65535 (0xFFFF) for effects.

For pitch commands: 0x0000 = highest pitch, 0x7800 = C0, 0x100 = one semitone.

Returns

PatternEvent

A new PatternEvent with the specified fields.

Remarks

This method provides maximum flexibility for creating events. For common scenarios, consider using specific factory methods like NoteEvent(Note, int?, byte?), ControllerEvent(int, byte, ushort), etc.

MakeFreqDivideEvent(int)

This is a helper method to automatically handle turning target controller values into column values.

For this controller the input value is taken as is, only clamped to column value range.

public PatternEvent MakeFreqDivideEvent(int value)

Parameters

value int

Returns

PatternEvent

MakeFreqMultiplyEvent(int)

This is a helper method to automatically handle turning target controller values into column values.

For this controller the input value is taken as is, only clamped to column value range.

public PatternEvent MakeFreqMultiplyEvent(int value)

Parameters

value int

Returns

PatternEvent

MakeNoteEvent(Note, byte?)

Creates a note event that triggers a note on the specified module.

public PatternEvent MakeNoteEvent(Note note, byte? velocity = null)

Parameters

note Note

Note value. Allows for explicit note commands.

velocity byte?

Note velocity. Returns null when default velocity is used. Automatically handles the +1 offset used in raw data.

Returns

PatternEvent

MakeOctaveEvent(int)

This is a helper method to automatically handle turning target controller values into column values.

For this controller the input value is taken as is, only clamped to column value range.

public PatternEvent MakeOctaveEvent(int value)

Parameters

value int

Returns

PatternEvent

MakePitchEvent(int)

This is a helper method to automatically handle turning target controller values into column values.

For this controller the input value is mapped from displayed range (-600 to 600) to column range (0 to 0x8000). Out of range values are clamped.

public PatternEvent MakePitchEvent(int value)

Parameters

value int

Returns

PatternEvent

MakePitchScaleEvent(int)

This is a helper method to automatically handle turning target controller values into column values.

For this controller the input value is mapped from displayed range (0 to 200) to column range (0 to 0x8000). Out of range values are clamped.

public PatternEvent MakePitchScaleEvent(int value)

Parameters

value int

Returns

PatternEvent

MakePolyphonyEvent(Toggle)

This is a helper method to automatically handle turning target controller values into column values.

For this controller the input value is taken as is, only clamped to column value range.

public PatternEvent MakePolyphonyEvent(Toggle value)

Parameters

value Toggle

Returns

PatternEvent

MakeResetEvent(Toggle)

This is a helper method to automatically handle turning target controller values into column values.

For this controller the input value is taken as is, only clamped to column value range.

public PatternEvent MakeResetEvent(Toggle value)

Parameters

value Toggle

Returns

PatternEvent

MakeResetOnStNote1Event(Toggle)

This is a helper method to automatically handle turning target controller values into column values.

For this controller the input value is taken as is, only clamped to column value range.

public PatternEvent MakeResetOnStNote1Event(Toggle value)

Parameters

value Toggle

Returns

PatternEvent

MakeResponseEvent(int)

This is a helper method to automatically handle turning target controller values into column values.

For this controller the input value is mapped from displayed range (0 to 1000) to column range (0 to 0x8000). Out of range values are clamped.

public PatternEvent MakeResponseEvent(int value)

Parameters

value int

Returns

PatternEvent

MakeSampleRateEvent(int)

This is a helper method to automatically handle turning target controller values into column values.

For this controller the input value is mapped from displayed range (1 to 32768) to column range (0 to 0x8000). Out of range values are clamped.

public PatternEvent MakeSampleRateEvent(int value)

Parameters

value int

Returns

PatternEvent

MakeSetControllerValueEvent(byte, ushort)

Creates a controller event that changes a module parameter.

public PatternEvent MakeSetControllerValueEvent(byte controllerId, ushort value)

Parameters

controllerId byte

value ushort

Parameter value for controller or effect (16-bit unsigned integer).

Range: 0-32768 (0x8000) for controllers, 0-65535 (0xFFFF) for effects.

For pitch commands: 0x0000 = highest pitch, 0x7800 = C0, 0x100 = one semitone.

Returns

PatternEvent

Remarks

For better type safety and readability, consider using typed module handles and extension methods.

MakeSetFrequencyEvent(double, byte?)

Creates a Set Pitch event by converting a frequency in Hz to the appropriate pitch value.

public PatternEvent MakeSetFrequencyEvent(double frequency, byte? velocity = null)

Parameters

frequency double

Frequency in Hz (e.g., 440.0 for A4).

velocity byte?

Velocity value (0-128). Use null for default velocity.

Returns

PatternEvent

A new PatternEvent with the calculated pitch value.

Examples

// Set pitch to A4 (440 Hz)
var a440 = PatternEvent.SetFrequencyEvent(0, 440.0, 100);
// Set pitch to middle C (261.63 Hz)
var c4 = PatternEvent.SetFrequencyEvent(0, 261.63);

MakeSetPitchEvent(ushort, byte?)

Creates a Set Pitch event with exact pitch value for microtonal or pitch-bend effects.

public PatternEvent MakeSetPitchEvent(ushort pitch, byte? velocity = null)

Parameters

pitch ushort

Pitch value where 0x0000 = highest pitch, 0x7800 = C0 (lowest), 0x100 = one semitone.

velocity byte?

Velocity value (0-128). Use null for default velocity.

Returns

PatternEvent

A new PatternEvent configured as a set pitch event.

Examples

// Set pitch to middle C (C4 = 0x3C00)
var middleC = PatternEvent.SetPitchEvent(0, 0x3C00);
// Set pitch to A4 (440Hz reference = 0x4500)
var a440 = PatternEvent.SetPitchEvent(0, 0x4500, 100);

ReadScope(AudioChannel, short[])

Read module scope view, and write it to a buffer.

public int ReadScope(AudioChannel channel, short[] buffer)

Parameters

channel AudioChannel

Audio channel.

buffer short[]

Buffer to receive scope data.

Returns

int

Number of samples successfully read.

Remarks

Calls sv_get_module_scope2(int, int, int, IntPtr, uint).

Exceptions

ArgumentNullException

Thrown if buffer is null.

SetColor(byte, byte, byte)

Set the module color.

public void SetColor(byte r, byte g, byte b)

Parameters

r byte

Red component (0 to 255).

g byte

Green component (0 to 255).

b byte

Blue component (0 to 255).

Remarks

Calls sv_set_module_color(int, int, int).

Exceptions

SunVoxException

Thrown when the operation fails.

SetFineTune(FineTunePair)

Sets the fine tune for the module.

public void SetFineTune(FineTunePair fineTune)

Parameters

fineTune FineTunePair

SetFreqDivide(int, ValueScalingMode)

Original name: 9 'Freq divide' Note: equivalent SendEvent(int, PatternEvent) will be used internally, which may introduce latency. It will also be affected by the event timestamp set.

public void SetFreqDivide(int value, ValueScalingMode valueScalingMode = ValueScalingMode.Displayed)

Parameters

value int

valueScalingMode ValueScalingMode

SetFreqMultiply(int, ValueScalingMode)

Original name: 8 'Freq multiply' Note: equivalent SendEvent(int, PatternEvent) will be used internally, which may introduce latency. It will also be affected by the event timestamp set.

public void SetFreqMultiply(int value, ValueScalingMode valueScalingMode = ValueScalingMode.Displayed)

Parameters

value int

valueScalingMode ValueScalingMode

SetName(string)

Set the module name.

public void SetName(string name)

Parameters

name string

New module name.

Remarks

Calls sv_set_module_name(int, int, IntPtr).

Exceptions

SunVoxException

Thrown when the operation fails.

ArgumentNullException

Thrown if name is null.

SetOctave(int, ValueScalingMode)

Original name: 7 'Octave' Note: equivalent SendEvent(int, PatternEvent) will be used internally, which may introduce latency. It will also be affected by the event timestamp set.

public void SetOctave(int value, ValueScalingMode valueScalingMode = ValueScalingMode.Displayed)

Parameters

value int

valueScalingMode ValueScalingMode

SetPitch(int, ValueScalingMode)

Value range: displayed: -600 to 600, real: 0 to 1200 Original name: 4 'Pitch' Note: equivalent SendEvent(int, PatternEvent) will be used internally, which may introduce latency. It will also be affected by the event timestamp set.

public void SetPitch(int value, ValueScalingMode valueScalingMode = ValueScalingMode.Displayed)

Parameters

value int

valueScalingMode ValueScalingMode

SetPitchScale(int, ValueScalingMode)

Value range: displayed: 0 to 200, real: 0 to 200 Original name: 5 'Pitch scale' Note: equivalent SendEvent(int, PatternEvent) will be used internally, which may introduce latency. It will also be affected by the event timestamp set.

public void SetPitchScale(int value, ValueScalingMode valueScalingMode = ValueScalingMode.Displayed)

Parameters

value int

valueScalingMode ValueScalingMode

SetPolyphony(Toggle)

Original name: 3 'Polyphony' Note: equivalent SendEvent(int, PatternEvent) will be used internally, which may introduce latency. It will also be affected by the event timestamp set.

public void SetPolyphony(Toggle value)

Parameters

value Toggle

SetPosition(int, int)

Set the module position.

public void SetPosition(int x, int y)

Parameters

x int

X coordinate (center: 512, working area: 0 to 1024).

y int

Y coordinate (center: 512, working area: 0 to 1024).

Remarks

Calls sv_set_module_xy(int, int, int, int).

Exceptions

SunVoxException

Thrown when the operation fails.

SetReset(Toggle)

Original name: 6 'Reset' Note: equivalent SendEvent(int, PatternEvent) will be used internally, which may introduce latency. It will also be affected by the event timestamp set.

public void SetReset(Toggle value)

Parameters

value Toggle

SetResetOnStNote1(Toggle)

Original name: 2 'Reset on 1st note' Note: equivalent SendEvent(int, PatternEvent) will be used internally, which may introduce latency. It will also be affected by the event timestamp set.

public void SetResetOnStNote1(Toggle value)

Parameters

value Toggle

SetResponse(int, ValueScalingMode)

Value range: displayed: 0 to 1000, real: 0 to 1000 Original name: 0 'Response' Note: equivalent SendEvent(int, PatternEvent) will be used internally, which may introduce latency. It will also be affected by the event timestamp set.

public void SetResponse(int value, ValueScalingMode valueScalingMode = ValueScalingMode.Displayed)

Parameters

value int

valueScalingMode ValueScalingMode

SetSampleRate(int, ValueScalingMode)

Value range: displayed: 1 to 32768, real: 1 to 32768 Original name: 1 'Sample rate' Note: equivalent SendEvent(int, PatternEvent) will be used internally, which may introduce latency. It will also be affected by the event timestamp set.

public void SetSampleRate(int value, ValueScalingMode valueScalingMode = ValueScalingMode.Displayed)

Parameters

value int

valueScalingMode ValueScalingMode

Operators

implicit operator SynthModuleHandle(GlideModuleHandle)

public static implicit operator SynthModuleHandle(GlideModuleHandle handle)

Parameters

handle GlideModuleHandle

Returns

SynthModuleHandle